Table of Contents
Advertisement
<bus_state> represents a combination of address, data and status
expressions that must be matched to satisfy the trigger qualifier.
•
To count all states in the trace, enter:
trace counting anystate
•
To count time in the trace, enter:
trace counting time
•
To disable counting in the trace, enter:
trace counting off
You can use the analyzer's state/time counter to count time or bus states. If
using the deep analyzer, counting imposes no restrictions on memory depth.
If using the 1K analyzer, use of the counter restricts the trace memory to a
maximum depth of 512 states. If you disable the counter in the 1K analyzer,
using the trace counting off command, maximum trace depth is 1024 states.
When using the 1K analyzer, the MC6833x emulator defaults to counting off.
To count states or time, you must configure the analyzer clocks correctly.
See "To configure the analyzer clock" in the "Configuring the Emulator"
chapter for more information.
Use the display trace count command to determine how the count is
displayed in the trace list. See "To display count information in the trace" for
more information.
Using the Emulation Analyzer
To count states or time
215
Advertisement
Table of Contents
