Table of Contents
Advertisement
Error Messages
Joining session already in progress, continue file loaded
Cause: This is a status message. When operating the emulator in multiple
windows, a new emulation session is "joined" to a current session. In this
case, the new session was able to continue because the continue file loaded
properly.
Joining session already in progress, user interface defaulted
Cause: When operating the emulator in multiple windows, a new emulation
session is "joined" to a current session. In this case, the new session used the
user interface default selections.
Lab firmware analysis subsystem; product address: %s (912)
Cause: This message should never occur. It shows that you have an
unreleased version of analysis firmware.
Lab firmware auxiliary subsystem; product address: %s (914)
Cause: This message should never occur. It shows that you have an
unreleased firmware version of the auxiliary subsystem.
Lab firmware for emulation subsystem (911)
Cause: This message should never occur. It shows that you have an
unreleased version of emulation firmware.
Lab firmware subsystem; product address: %s (913)
Cause: This message should never occur. It shows that you have an
unreleased version of system controller firmware.
Load aborted
Cause: While loading a file into the emulator, an event occurred that caused
the host system to stop the load process.
Action: Use the display error_log command to view any errors. If the problem
persists, make sure the host system and emulator are operating properly, and
that you are trying to load an acceptable file. See the "Emulator/Analyzer
Interface Commands" chapter for information about the load command.
467
Advertisement
Table of Contents
