Table of Contents
Advertisement
Error Messages
Unknown expression type
Cause: While entering your command, you included an unknown expression
type.
Action: See the EXPR command syntax for more information about
expressions. Then try entering your command again with a known expression
type.
Unload trace data failed
Cause: An unexpected error occurred while waiting for a trace to be
completed.
Action: End and release the session, and then try again.
Wait time failure, could not determine system time
Cause: The system call failed.
Action: Verify that 'date' executes correctly from the UNIX prompt.
Warning: at least one integer truncated to 32 bits
Warning: at least one integer truncated to 16 bits
Warning: at least one integer truncated to 8 bits
Cause: The number entered was too large for the currently specified display
or access size.
Action: Try entering the command again using the correct size of number.
Width not in range: 1 <= valid width <= 80
Cause: You tried to specify the width of the field outside the range from 1 to
80.
Action: Try entering the command again using a valid number for the width.
Write to ROM break: %s" (628)
Cause: When the emulator is configured to break on writes to ROM, a
memory write access to a location mapped as ROM has occurred during
execution of the user program.
Action: Investigate the cause of the write to ROM by the user program. You
can configure the emulator so that it does not break on writes to ROM.
486
Advertisement
Table of Contents
