Table of Contents
Advertisement
Error Messages
Incompatible compatibility table entry (206)
Cause: The emulation firmware (ROM) is not compatible with the analysis or
system firmware in your HP 64700 system.
Action: The ROMs in your emulator must be compatible with each other for
your emulation system to work correctly. Contact your Hewlett-Packard
Representative.
Incompatible with 64700 firmware version (10352)
Cause: The installed interface firmware combination is incorrect or
incompatible.
Action: Upgrade the interface software of product firmware.
Initialization failed
Cause: The emulator could not be initialized.
Action: Make sure your data communication switch settings are correct, and
that all Softkey Interface software has been loaded properly. Cycle power on
the emulator, then try starting up the emulation session again.
Initialization load failed
Cause: The emulator could not be initialized.
Action: Make sure your data communication switch settings are correct, and
that all Softkey Interface software has been loaded properly. Cycle power on
the emulator, then try starting up the emulation session again.
Initializing emulator with default configuration
Cause: This is a status message. The host system started the emulation
session and initialized the emulator using the default configuration. The
emulator is probably operating correctly.
Initializing user interface with default config file
Cause: This is a status message. The host system started the emulation
session and Softkey Interface using the default configuration file. The
emulator is probably operating correctly.
463
Advertisement
Table of Contents
