Table of Contents
Advertisement
Number of HP 64700 Series
Emulators
2 to 8
9 to 16
9 to 16
17 to 32
* A modification must be performed by your HP Customer Engineer.
Emulators using the CMB must use background emulation monitors.
At least 3/4 of the HP 64700-Series emulators connected to the CMB must be powered up before
proper operation of the entire CMB configuration can be assured.
To connect to the rear panel BNC
The BNC line on the HP 64700 accepts input and output of TTL levels only.
C A U T I O N
(TTL levels should not be less than 0 volts or greater than 5 volts.) Failure to
observe these specifications may result in damage to the HP 64700 Card
Cage.
Maximum Total Length of Cable
100 meters
50 meters
100 meters
50 meters
Making Coordinated Measurements
To connect to the rear panel BNC
Restrictions on the CMB
Connection
None.
None.
Only 8 emulators may have rear
panel pullups connected. *
Only 16 emulators may have rear
panel pullups connected. *
309
Advertisement
Table of Contents
