Table of Contents
Advertisement
Error Messages
Emul700dmn version incompatible with this product
Cause: The emulation session could not begin because the version of the
HP 64700 emulator daemon executable on host system is not compatible with
the version of the Softkey Interface you are using.
Action: Make sure the software has been properly installed. Then try starting
the emulator again.
Emulation analyzer defaulted to delete label
Cause: Analyzer trace labels were changed or modified while labels were in
use in the trace specification.
Action: Enter the previous trace specification and try again.
Emulation memory access failed (702)
Cause: System failure.
Action: Run performance verification (Terminal Interface pv command).
Emulator locked by another user (10326)
Cause: This message occurs when you try to start an emulation interface, but
your attempt failed because the emulator is being used by someone else.
Action: The current user must release the emulator.
Emulator locked by another user interface (10330)
Cause: You tried to start an emulator interface, but your attempt failed
because the emulator is already in use by someone else.
Action: Current user must release the emulator.
Emulator locked by user: <USER NAME> (10329)
Cause: You tried to start an emulator interface, but your attempt failed
because the emulator is already in use by someone else.
Action: Current user must release the emulator.
Enable breakpoint failed: %s (665)
Cause: System failure or target condition.
Action: Check memory mapping and configuration questions.
458
Advertisement
Table of Contents
