Using the Emulator
To display the event log
Examples
To display the name of your emulation module:
name_of_module
The name of the emulation module is displayed on the status line.
To display the event log
•
Choose Display→Event Log.
•
Position the mouse pointer on the status line, press and hold the
select mouse button, and then choose Display Event Log from the
popup menu.
•
Using the command line, enter the display event_log command.
The last 100 events that have occurred during the emulation session are
displayed.
The status of the emulator and analyzer are recorded in the event log, as well
as the conditions that cause the status to change (for example, software
breakpoints and trace commands).
To display the error log
•
Choose Display→Error Log.
•
Position the mouse pointer on the status line, press and hold the
select mouse button, and then choose Display Error Log from the
popup menu.
•
Using the command line, enter the display error_log command.
The last 100 error messages that have occurred during the emulation session
are displayed.
184