Table of Contents
Advertisement
Error Messages
This chapter alphabetically lists and describes the error messages displayed
on the interface status line and in the error log. The error log records error
messages received during the emulation session. You may want to display the
error log to view the error messages. Sometimes several messages will be
displayed for a single error to help you locate a problem quickly. To prevent
overrun, the error log purges the oldest messages to make room for the new
ones.
To display the error log, enter:
display error_log
Error messages are listed alphabetically by the first letter of the first word of
the error messages. In the error log, some messages may be preceded by a
number. Messages in this chapter that have an error message number
associated with them have the number listed in parentheses following the
message. These are ordered alphabetically by the first letter of the first word.
%s (622)
Cause: Monitor specific message.
<CONFIGURATION FILENAME> does not exist
Cause: The configuration file you are trying to load does not exist.
Action: Try the load configuration command again using a valid configuration
file name.
<LOGICAL NAME>: End, continuing
Cause: This is a status message. The emulation session is being exited with
the end command. When you restart the emulation session later, it will
continue using the same settings as in the session you just ended. The
emulator logical name is located in the /usr/hp64000/etc/64700tab.net (or
64700tab) file.
446
Advertisement
Table of Contents
