Step 1. Start The Demo - HP 64782 User Manual

Getting Started

Step 1. Start the demo

Step 1. Start the demo
A demo program and its associated files are provided with the Graphical User
Interface.
Change to the demo directory.
1
$ cd /usr/hp64000/demo/debug_env/hp64749
Refer to the README file for more information on the demo program.
Check that "/usr/hp64000/bin" and "." are in your PATH environment
2
variable. To see the value of PATH:
$ echo $PATH
If the Graphical User Interface software is installed on a different
3
type of computer than the computer you are using, edit the
"platformScheme" resource setting in the "Xdefaults.emul" file.
For example, if the Graphical User Interface will be run on a HP 9000
computer and displayed on a Sun SPARCsystem computer, change the
platform scheme to "SunOS".
Start the emulator/analyzer demo.
4
$ Startemul <logical_emul_name>
This script starts the emulator/analyzer interface (with a customized set of
action keys), loads a configuration file for the demo program, and then loads
the demo program.
The <logical_emul_name> in the command above is the logical emulator
name given in the HP 64700 emulator device table file
(/usr/hp64000/etc/64700tab.net). It may also be the LAN name.
32