To Drive The Emulation Analyzer Trigger Signal To The Cmb; To Drive The Emulation Analyzer Trigger Signal To The Bnc Connector; To Drive The External Analyzer Trigger Signal To The Cmb - HP 64782 User Manual

Making Coordinated Measurements

To drive the emulation analyzer trigger signal to the CMB

•
Arm the emulation analyzer on signal from CMB.
•
Arm the emulation analyzer on signal from BNC.
•
Arm the emulation analyzer on external analyzer trigger.
•
Arm the external analyzer on signal from CMB.
•
Arm the external analyzer on signal from BNC.
•
Arm the external analyzer on emulation analyzer trigger.
To drive the emulation analyzer trigger signal to the
CMB
•
Choose "receive" for the "Should CMBT drive or receive Trig1"
configuration option.
You could also drive the emulation analyzer trigger to the CMB over the trig2
internal line by specifying that the CMBT should receive trig2 and that the
emulation analyzer should drive trig2.
To drive the emulation analyzer trigger signal to the
BNC connector
•
Choose "receive" for the "Should BNC drive or receive Trig1"
configuration option.
You could also drive the emulation analyzer trigger to the BNC over the trig2
internal line by specifying that the BNC should receive trig2 and that the
emulation analyzer should drive trig2.
To drive the external analyzer trigger signal to the
CMB
Choose "receive" for the "Should CMBT drive or receive Trig2"
1
configuration option.
Choose "drive" for the "Should External Analyzer drive or receive
2
Trig2" configuration option.
316