HP 64782 User Manual page 6

For the graphical user interface
Hide thumbs Also See for 64782:
Table of Contents

Advertisement

With the HP 64700 Card Cage, You Can ...
Use the RS-422 capability of the serial port and an RS-422 interface card
on the host computer (HP 98659 for the HP 9000 Series 300) to provide
upload/download rates of up to 230.4K baud.
Easily access and use the emulator over a Local Area Network by
connecting it to the LAN.
Easily upgrade HP 64700 firmware by downloading to flash memory.
With Multiple HP 64700s, You Can ...
Start and stop up to 16 emulators at the same time (up to 32 if
modifications are made).
Use the analyzer in one HP 64700 to arm (that is, activate) the analyzers
in other HP 64700 card cages or to cause emulator execution in other
HP 64700 card cages to break.
Use the HP 64700's BNC connector to trigger an external instrument (for
example, a logic analyzer or oscilloscope) when the analyzer finds its
trigger condition, or you can allow an external instrument to arm the
analyzer or break emulator execution.
With the Graphical User Interface, You Can ...
Use the emulator and analyzer under an X Window System that supports
OSF/Motif interfaces.
Enter commands using pull-down or pop-up menus.
Enter, recall, and edit commands using the command line pushbuttons.
Enter file names, recalled commands, recalled values, etc., using dialog
boxes.
Set breakpoints by pointing the mouse cursor on a line in the mnemonic
memory display and clicking.
Create action keys for commonly used commands or command files.
With the Softkey Interface, You Can ...
Use the emulator and analyzer with a terminal or terminal emulator.
Quickly enter commands using softkeys, command recall, and command
editing.
5

Advertisement

Table of Contents
loading

Table of Contents