Concepts
Display→Configuration Info→Chip Selects (Emulator SIM)
This displays chip selects in the EMSIM (emulator) register set in a table.
Use this to see how the EMSIM registers have configured the chip select pins
of the emulation copy.
Display→Configuration Info→Bus Interface Ports (SIM)
This displays bus interface ports in the SIM (processor) register set in a
table. Use this to see how the SIM registers have configured the external bus
interface pins of Port C, Port E, and Port F.
Display→Configuration Info→Bus Interface Ports (Emulator SIM)
This displays bus interface ports in the EMSIM (emulator) register set in a
table. Use this to see the SIM register values that will be loaded into the
processor SIM when the monitor is entered from emulation reset.
Display→Configuration Info→Memory Map
This displays detailed information about the memory map in a table. Use this
to check the way the memory map has been configured.
Display→Configuration Info→Reset Mode Value
This displays the reset mode configuration value and operation in a table.
This is the value that will be driven onto the data bus to configure the
processor when it comes out of reset. The meaning of each data bit in the
value is shown.
Display→Configuration Info→Initialization Source Code
This displays the assembly language program to initialize the processor SIM
and RAM based on the current contents of the EMSIM and EMRAM register
sets.
505