Examples
A message tells you whether the display is open or closed. You can modify
the configuration to enable status messages.
To use simulated I/O keyboard input
•
To begin using simulated I/O input, choose Settings→Simulated IO
Keyboard.
•
To end simulated I/O and return to using the interface, use the
suspend softkey.
For Simulated I/O to work, you must configure the emulator to enable polling
of simulated I/O.
The command line entry area is used for simulated input with the keyboard.
Therefore, if the command line is turned off, choosing this menu item with
turn command line display back on.
If you are planning to use even a modest amount of simulated I/O input
during an emulation session, it might be a good idea to open another
Emulator/Analyzer window to be used exclusively for simulated I/O input and
output.
Using the Emulator
To use simulated I/O keyboard input
191