Table of Contents
Advertisement
<NUMSRC>
This prompts you for the number of source lines to be displayed. Values in
the range 1 through 50 may be entered.
source
This displays source lines of memory.
memory
This option prevents inclusion of source lines in the trace and memory
off
mnemonic display lists.
This option displays source program lines preceding actual processor
on
instructions with which they correlate. This enables you to correlate
processor instructions with your source program code. The option works for
both the trace list and memory mnemonic displays.
This option displays only source lines. Processor instructions are only
only
displayed in memory mnemonic if no source lines correspond to the
instructions. Processor instructions are never displayed in the trace list.
symbols
This prevents symbol display.
off
This displays symbols. This option works for the trace list, memory, software
on
breakpoints, and register step mnemonics.
Displays only high level symbols, such as those available from a compiler.
high
See the Symbolic Retrieval Utilities User's Guide for a detailed discussion
of symbols.
Displays only low level symbols, such as those generated internally by a
low
compiler, or an assembly symbol.
Displays all symbols.
all
This option allows you to define the number of spaces inserted for tab
tabs_are
characters in the source listing.
Prompts you for the number of spaces to use in replacing the tab character.
<TABS>
Values in the range of 2 through 15 may be entered.
trace
Sets update option for trace displays only.
update
When using multiple windows or terminals, and specifying this option, the
display buffer in that window or terminal will be updated when a new
measurement completes. This is the default. Note that for displays that
show memory contents, the values will be updated when a command
executes that changes memory contents (such as modify memory, load, and
so on).
Emulator/Analyzer Interface Commands
set
417
Advertisement
Table of Contents
