Table of Contents
Advertisement
Examples
To check for inconsistencies between the configuration and the EMSIM
registers, choose Display→Configuration Info→Diagnostics from either
the configuration interface the emulator/analyzer interface pulldown menu.
!STATUS
170! CS0 is set for block size of 1M byte but A19 is not available
!STATUS
170! CS0 is DS qualified and SIZx not available; max clock is 8 MHz
!STATUS
171! CS1 is configured for fast termination; max clock is 8 MHz
!ERROR
172! CS2 is used in map spec but not defined as a chip select
!ERROR
173! CS3 is used in map spec but not enabled (byte or R/W)
!ERROR
174! Need FC2 or chip select for map entry #3
!ERROR
175! No chip selects programmed for address range of map entry #4
!ERROR
176! CSBOOT width (8/16 bit) in reset config conflicts with emcspar0
!ERROR
178! Need DSACK1 at port E or chip select DSACK for map entry #5
Another sample inconsistency check might yield:
!STATUS
177! BG at reset config, emulator expects CS1 (emsim value)
!STATUS
177! BGACK at reset config, emulator expects CS2 (emsim value)
!STATUS
177! FC0 at reset config, emulator expects CS3 (emsim value)
!STATUS
177! FC1 at reset config, emulator expects CS4 (emsim value)
!STATUS
177! FC2 at reset config, emulator expects CS5 (emsim value)
!STATUS
177! A19 at reset config, emulator expects CS6 (emsim value)
!STATUS
177! A20 at reset config, emulator expects CS7 (emsim value)
!STATUS
177! A21 at reset config, emulator expects CS8 (emsim value)
!STATUS
177! A22 at reset config, emulator expects CS9 (emsim value)
!STATUS
177! A23 at reset config, emulator expects CS10 (emsim value)
!STATUS
177! PortE0 at reset config, emulator expects DSACK0 (emsim value)
!STATUS
177! PortE1 at reset config, emulator expects DSACK1 (emsim value)
!STATUS
177! PortE4 at reset config, emulator expects DS (emsim value)
!STATUS
177! PortE5 at reset config, emulator expects AS (emsim value)
!STATUS
177! PortE6 at reset config, emulator expects SIZ0 (emsim value)
!STATUS
177! PortE7 at reset config, emulator expects SIZ1 (emsim value)
Configuring the Emulator
To check for configuration inconsistencies
131
Advertisement
Table of Contents
