Table of Contents
Advertisement
Configuring the Emulator
To start the configuration interface
To start the configuration interface
•
Choose Modify→Emulator Config... from the emulator/analyzer
interface pulldown menu.
•
Using the command line, enter the modify configuration command.
The configuration interface top-level dialog box (see the following example)
is displayed.
The configuration sections that are presented depend on the hardware and
the features of your particular emulator.
The configuration interface may be left running while you are using the
emulator/analyzer interface.
If you're using the Softkey Interface from a terminal or terminal emulation
window, you don't get a dialog box from which to choose configuration
sections; however, you have access to the same configuration options
through a series of configuration questions.
96
Advertisement
Table of Contents
