Table of Contents
Advertisement
Emulator/Analyzer Interface Commands
display registers
display registers
This command displays the current contents of the emulation processor
registers.
If a step command just executed, the mnemonic representation of the last
instruction is also displayed, if the current display is the register display.
This process does not occur in real-time. The emulation system must be
configured for nonreal-time operation to display registers while the processor
is running. Symbols also may be displayed in the register step mnemonic
string (see set symbols).
With no options specified, the basic register class is displayed as the default.
This includes the local and global registers.
The parameters are as follows:
<CLASS>
This allows you to display a particular class of emulation processor registers.
<REGISTER>
This displays an individual register or control register field.
Examples
display registers
display registers BASIC D2
See Also
The copy registers, modify registers, set, and step commands.
372
Advertisement
Table of Contents
