Copy Trace - HP 64782 User Manual

copy trace

This command copies the contents of the trace buffer to a file or to the
printer.
Trace information is copied in the same format as specified in the last display
trace command.
Initial values are the same as specified by the last display trace command.
The parameters are as follows:
from_line_number This specifies the trace list line number from which copying will begin.
<LINE#> Use this with from_line_number and thru_line_number to specify the starting
and ending trace list lines to be copied.
thru_line_number
Specifies the last line number of the trace list to include in the copied range.
Examples
copy trace to tlist
copy trace from_line_number 0 thru_line_number 5
to longtrac
See Also
The display trace and store trace commands.
Emulator/Analyzer Interface Commands
copy trace
357