To Add Memory Map Entries - HP 64782 User Manual

To add memory map entries

•
Choose Map→Add New Entry from the pulldown menu in the
memory map window.
•
Press and hold the select mouse button and choose Add New Entry
from the popup menu.
•
Using the command line (Settings→Command Line), enter the
address range, memory type, and possibly a blk1-blk6 attribute for
emulation memory ranges.
You can characterize memory ranges as emulation RAM, emulation ROM,
target system RAM, target system ROM, or as guarded memory.
Guarded memory accesses will cause emulator execution to break into the
monitor program.
Writes to locations characterized as ROM will cause emulator execution to
break into the monitor program if the "Break processor on write to ROM"
trace/debug configuration option is enabled.
Writes to emulation ROM will be inhibited. Writes by user code to target
system memory locations mapped as ROM or guarded memory will result in a
break to the monitor but are not inhibited (that is, the write still occurs).
Configuring the Emulator
To add memory map entries
111