Table of Contents
Advertisement
Emulator/Analyzer Interface Commands
set
<VALUE>
Specifies the logical value to which a particular UNIX environment variable is
to be set.
width
This allows you to specify the width (in columns) of the source lines in the
source
memory mnemonic display. To adjust the width of the source lines in the
trace display, increase the widths of the label and/or mnemonic fields.
This lets you specify the address width (in columns) of the address field in
label
the trace list or label (symbols) field in any of the other displays.
This lets you specify the width (in columns) of the mnemonic field in
mnemonic
memory mnemonics, trace list and register step mnemonics displays. It also
changes the width of the status field in the trace list.
This prompts you for the column width of the source, label, mnemonic, or
<WIDTH>
symbols field.
Note that <CTRL>f and <CTRL>g may be used to shift the display left or
right to display information which is off the screen.
Examples
set source on inverse_video on tabs_are 2
set symbols on width label 30 mnemonic 20
set PRINTER = "lp -s"
set HP64KSYMBPATH=".file1:proc1
.file2:proc2:code_block_1"
See Also
The display data, display memory, display software_breakpoints,
and display trace commands.
418
Advertisement
Table of Contents
