Table of Contents
Advertisement
Depending on the information you choose to copy, default values may be
options selected for the previous execution of the display command. For
example, if you display memory locations 10h through 20h, then issue a copy
memory to myfile command, myfile will list only memory locations 10h
through 20h.
The parameters are as follows:
configuration_info
Copies the last configuration information display.
data
Copies a list of memory contents formatted in various data types (see display
data).
display
Copies the display to a selected destination.
error_log
Copies the most recent errors that have occurred.
event_log
Copies the most recent events that have occurred.
<FILE>
This prompts you for the name of a file where you want the specified
information to be copied. If you want to specify a file name that begins with a
number, you must precede the file name with a backslash. For example:
copy display to \12.10.
global_symbols
Copies a list of global symbols to the selected destination.
help
Copies the contents of the emulation help files to the selected destination.
<HELP_FILE>
This represents the name of the help file to be copied. Available help file
names are displayed on the softkey labels.
UNIX CMD
This represents an UNIX filter or pipe where you want to route the output of
the copy command. UNIX commands must be preceded by an exclamation
point (!). An exclamation point following the UNIX command continues
command line execution after the UNIX command executes. Emulation is
not affected when using an UNIX command that is a shell intrinsic.
local_symbols_in
Copies all the children of a given symbol to the selected destination. See the
--SYMB-- syntax page and the Symbolic Retrieval Utilities User's Guide for
information on symbol hierarchy.
memory
Copies a list of the contents of memory to the selected destination.
noappend
This causes any copied information to overwrite an existing file with the
same name specified by <FILE>. If this option is not selected, the default
operation is to append the copied information to the end of an existing file
with the same name that you specify.
noheader
Copies the information into a file without headings.
pod_command
This allows you to copy the most recent commands sent to the HP 64700
Series emulator/analyzer.
Emulator/Analyzer Interface Commands
copy
351
Advertisement
Table of Contents
