HP 64782 User Manual page 7

In This Book
This book documents the Graphical User Interface and the Softkey Interface
when used with the HP 64782 6833x emulators and the HP 64703/4 analyzer.
It is organized into five parts whose chapters are described below.
Part 1. Quick Start Guide
Chapter 1 presents an overview of emulation and analysis and quickly
shows you how to use the emulator and analyzer.
Part 2. User's Guide
Chapter 2 tells where to find information about plugging the emulator
into a target system.
Chapter 3 shows you how to start and exit the HP 64700 interfaces.
Chapter 4 shows you how to enter commands.
Chapter 5 shows how to configure the emulator.
Chapter 6 shows how to use the emulator.
Chapter 7 shows how to use the analyzer.
Chapter 8 shows how to use the Software Performance Measurement
Tool (SPMT) with the analyzer.
Chapter 9 shows how to use the external state analyzer.
Chapter 10 shows how to make coordinated measurements.
Chapter 11 shows how to change X resource settings.
Part 3. Reference
Chapter 12 describes emulator/analyzer interface commands.
Chapter 13 lists the error messages that can occur.
Part 4. Concept Guide
Chapter 14 contains conceptual information on various topics.
Part 5. Installation Guide
Chapter 15 outlines the installation of the Graphical User Interface.
Chapter 16 shows you how to install or update emulator firmware.
Follow these instructions if you have ordered the HP 64782 emulator
and the HP 64700 Card Cage separately.
6