Table of Contents
Advertisement
Using the Emulation Analyzer
To display the trace about a line number
To display the trace about a line number
•
Choose Trace→Display Options... and in the dialog box, enter the
desired trace list line number in the field beside Move to Line. Then
click the OK or Apply pushbutton.
•
Center the trace display about a particular state given by <LINE #>
by entering
display trace <LINE #>
If you need to move to a particular state quickly, you can use this command.
The command places the specified state in the center of the current trace
display.
Examples
Display the trace about line number 20:
Choose Trace→Display Options... and in the dialog box, enter 20 in the
field beside Move to Line. Then click the OK or Apply pushbutton.
Enter the following command on the command line to display the trace about
line number 256:
display trace 256
234
Advertisement
Table of Contents
