Table of Contents
Advertisement
Error Messages
Unable to redefine label; used by emulation analyzer: <label> (1108)
Cause: This error occurs when you attempt to redefine an emulation trace
label which is currently used as a qualifier in the emulation trace
specification.
Action: You stop the trace or must change the trace command before you
can redefine the label.
Unable to redefine label; used by external state analyzer: <label> (1109)
Cause: This error occurs when you attempt to redefine an external trace
label which is currently used as a qualifier in the external state trace
specification.
Action: You stop the trace or must change the trace command before you
can redefine the label.
Unable to redefine label; used by external timing analyzer: <label>
(1110)
Cause: This error occurs when you attempt to redefine an emulation or
external trace label which is currently being used as a qualifier in the
external timing trace specification.
Action: Remove the label from the external timing analyzer specifications,
and then redefine the label.
Unable to reload old memory map; hardware state unknown (726)
Cause: System failure.
Action: Run performance verification (Terminal Interface pv command).
Unable to reset (640)
Cause: Target condition or system failure.
Action: Check target system, and run performance verification (Terminal
Interface pv command).
Unable to run (610)
Cause: System failure or target condition.
Action: Run performance verification (Terminal Interface pv command), and
check target system.
484
Advertisement
Table of Contents
