Table of Contents
Advertisement
Figure 11 IP Configuration
Configuring the system time
If the HP MSR SBM's time differs from that of the domain controller's (the
Windows Active Directory), the HP MSR SBM cannot join the domain
and other functions will fail. Therefore, the HP MSR SBM must be set with
the correct time. You can set the system time manually:
Set the time zone and daylight saving time. The daylight saving time
grayed out if it is not supported in the time zone.
Date
Time
To set the system time by using NTP:
Select the checkbox before Automatically using Internet Time.
1.
Enter the IP address or the FQDN of the network time server.
2.
Click Next.
3.
18
Advertisement
Table of Contents
