Juniper PTX10008 Hardware Manual page 95

Figure 52: All Ports Are Enabled for Channelized 4x10-Gigabit Ethernet by Default
All por t s can be u sed as 40-Gi gabit Ethern et
Figure 53: 100-Gigabit Ethernet Ports
100-Gi gabit Ethern et por t s
Disab led when 100-Gi gabit Ethern et
por t s are used
Figure 54: 100-Gigabit Ethernet Port Disables Two Associated 40-Gigabit Ethernet Ports
The 40-Gigabit Ethernet ports can operate independently, be channelized into four 10-Gigabit Ethernet
ports, or bundled with the next two consecutive ports and channelized into twelve 10-Gigabit Ethernet
ports as a port range. Only the first and fourth port in each 6XQSFP cage are available to channelize a port
range (see Figure 55 on page
speed command. For example, to channelize the first router port, use the set chassis fpc 0 pic 0port 1speed
10g command.
97). The port speed must be configured using the set chassis fpc pic port
96