Juniper PTX10008 Hardware Manual page 90

Table 27: Line Card Summary (continued)
Line Card Description
PTX10K-LC1105 30-port 100-Gigabit or 40-Gigabit Ethernet
with MACsec
QFX10000-60S-6Q 60-port 10-Gigabit or 1-Gigabit Ethernet;
2-port of 40-Gigabit or 100-Gigabit Ethernet;
4 port of 40-Gigabit
PTX10K-LC1101 Line Card
IN THIS SECTION
Overview | 91
Channelizing 40-Gigabit Ports | 92
Network Ports | 94
The PTX10K-LC1101 line card consists of thirty QSFP+ Pluggable Solution (QSFP28) cages that support
either 40-Gigabit Ethernet or 100-Gigabit Ethernet optical transceivers. The PTX10K-LC1101 line cards
also support 10-Gigabit Ethernet Interfaces. For 10-Gigabit Ethernet, you must configure the port using
the channelization command. By default, the interfaces are created with 100G port speed. If the user plugs
in 40G or 4*10G transceiver, you must configure the appropriate port speed manually.
This topic describes:
Overview
The line cards in PTX10000 routers combine a Packet Forwarding Engine and Ethernet interfaces in a
single assembly. Line cards are field-replaceable units (FRUs) that can be installed in the line card slots on
the front of the router chassis. The line cards are hot-insertable and hot-removable; you can remove and
replace them without powering off the router or disrupting router functions. PTX10000 line cards use a
Dimensions Weight
17.2 in x 1.89 in x 20.5 28.5 lbs
in
12.93 kg
43.68 cm x 4.8 cm x
52.07 cm
17.2 in x 1.89 in x 20.5 9.7 lbs
in
4.39 kg
43.68 cm x 4.8 cm x
52.07 cm
91