Juniper PTX10008 Hardware Manual page 211

To install the router in the rack or cabinet (see
CAUTION:
one at the bottom of the rack. Do not attempt to install a router manually in an upper
position in a rack or cabinet.
1. Ensure that the rack or cabinet is placed in its permanent location and is secured to the building.
2. Align the router in front of the rack or cabinet, centering it in front of the adjustable base and rear
brackets. Use a pallet jack if one is available.
3. With one person on each side and one person in the rear, hold the bottom of the chassis and carefully
lift it onto the adjustable base and rear brackets installed in a four-post rack. See
WARNING:
your back. Do not twist your body as you lift. Balance the load evenly and be sure
that your footing is firm.
Figure 84 on page
If you are installing more than one router in a rack or cabinet, install the first
To prevent injury, keep your back straight and lift with your legs, not
216):
Figure 83 on page
214
215.