Juniper PTX10008 Hardware Manual page 372

Locating the Serial Number on a PTX10000 Router or Component
IN THIS SECTION
Listing the Chassis and Component Details Using the CLI | 377
Locating the Chassis Serial Number ID Label on a PTX10008 or a PTX10016 | 379
Locating the Serial Number ID Labels on PTX10000 Power Supplies | 381
Locating the Serial Number ID Labels on PTX10000 Fan Trays and Fan Tray Controllers | 384
Locating the Serial Number ID Labels on PTX10000 Routing and Control Boards | 385
Locating the Serial Number ID Labels on a PTX10000 Line Card | 386
Locating the Serial Number ID Labels on a PTX10000 Switch Interface Board (SIB) | 386
Locating the Serial Number ID Label on a PTX10000 SATA SSD | 386
If you are returning a router or component to Juniper Networks for repair or replacement, you must locate
the serial number of the router or component. You must provide the serial number to the Juniper Networks
Technical Assistance Center (JTAC) when you contact them to obtain a Return Materials Authorization
(RMA). See "Contacting Customer Support to Obtain a Return Materials Authorization for a PTX10000
Router or Component" on page
If the router is operational and you can access the command-line interface (CLI), you can list serial numbers
for the router and for some components with a CLI command. If you do not have access to the CLI or if
the serial number for the component does not appear in the command output, you can locate the serial
number ID label on the router or component.
NOTE: If you want to find the serial number ID label on a component, you need to remove the
component from the router chassis, for which you must have the required parts and tools available.
Listing the Chassis and Component Details Using the CLI
To list the PTX10008 or the PTX10016 chassis and the components and their serial numbers, use the
show chassis hardware CLI operational mode command.
user@device> show chassis hardware
387.
377