Juniper PTX10008 Hardware Manual page 230

To connect earth ground to a PTX10008 or PTX10016 chassis:
1. Verify that a licensed electrician has attached the cable lug (provided in the accessory kit) to the
grounding cable.
2. Connect the other end of the grounding cable to a proper earth ground, such as the rack in which the
router is mounted.
3. Attach an ESD grounding strap to your bare wrist, and connect the strap to the ESD grounding point
next to the earthing posts (see
Figure 98: ESD Point for the PTX10008
1 Grounding point
—
Figure 99: ESD Point for the PTX10016
1 Grounding point
—
4. Remove the two screws on the chassis using a Phillips screwdriver.
Figure 98 on page 233 and Figure 99 on page 233).
233