Juniper PTX10008 Hardware Manual page 189

Table 71: Console Port Connector Pinouts for the PTX10000 Series
Pin
1
2
3
4
5
6
7
8
SEE ALSO
Connecting a PTX10000 Router to a Management Console | 237
USB Port Specifications for the PTX10000 Series
The following Juniper Networks USB flash drives have been tested and are officially supported for the
USB port in the PTX10000 Series:
RE-USB-1G-S—1-gigabyte (GB) USB flash drive
RE-USB-2G-S—2-GB USB flash drive
Signal
RTS Output
DTR Output
TOD Output for PTP applications
TxD Output
Signal Ground
Signal Ground
RxD Input
DCD Input
TOD Output for PTP applications
CTS Input
Description
Request to send
Data terminal ready
Time of day for Precision Time Protocol
(PTP). You can use DTR pins as a TOD
universal asynchronous
receiver/transmitter (UART) by using
breakout cables.
Transmit data
Signal ground
Signal ground
Receive data
Data carrier detect
Time of day for PTP. You can use DCD
pins as a TOD UART by using breakout
cables.
Clear to send
191