Software Features - Juniper PTX10008 Hardware Manual

Software Features

Compliance with ITU G.709 and G.798
Transport interface and state model (GR-1093)
Performance monitoring features such as alarms, threshold-crossing alarms, OTU/ODU error seconds,
and FEC and bit error rate (BER) statistics
SNMP management of the MIC based on RFC 3591, Managed Objects for the Optical Interface Type,
including the following:
Black Link MIB–jnx-bl.mib
IFOTN MIB–jnx-ifotn.mib
Optics MIB–jnx-optics.mib
FRU MIB–jnx-fru.mib
User-configurable optics options:
Modulation format: 16QAM, 8QAM, QPSK
FEC mode (15% SDFEC or 25% SDFEC)
Differential and non-differential encoding modes
Transmit (TX) laser enable and disable
TX output power
Wavelength
Threshold crossing alarms (TCAs)
IEEE 802.1ag OAM
IEEE 802.3ah OAM
IFINFO/IFMON
IEEE 802.3ad link aggregation
Flexible Ethernet services encapsulation
Flexible VLAN tagging
Source address MAC accounting per logical interface
Source address MAC filter per port
Source address MAC filter per logical interface
Destination address MAC filter per port
Up to 8000 logical interfaces shared across all ports on a single Packet Forwarding Engine
106