Juniper PTX10008 Hardware Manual page 385

Figure 234: Stacking Configuration for Packing the PTX10016 Chassis
To pack a PTX10000 for shipping:
1. Power down the chassis and remove the power cables. See
2. Remove the cables that connect the PTX10000 to all external devices.
3. Remove all line cards and pack them in their original shipping containers. See
Component for Shipping" on page
4. Install covers over blank slots.
Leave components that came installed in the chassis in the chassis, such as the Control Boards or power
supplies.
388.
"Powering Off a PTX10000" on page
"Packing a PTX10000 or
390
356.