Ptx10000 Status Panel Leds - Juniper PTX10008 Hardware Manual

Table 6: FRUs in an PTX10000 Router (continued)
FRU
Line cards
Optical transceivers
See "PTX10000 Optical
Transceiver and Cable Support"
on page 184 for the Junos OS
release in which the transceivers
were introduced.
NOTE: Line cards are not part of the base or redundant configuration. You must order them
separately.
NOTE: If you have a Juniper Care service contract, register any addition, change, or upgrade of
hardware components at https://www.juniper.net/customers/support/tools/updateinstallbase/.
Failure to do so can result in significant delays if you need replacement parts. This note does not
apply if you replace an existing component with the same type of component.
SEE ALSO
PTX10008 Components and Configurations | 35
PTX10016 Components and Configurations
PTX10000 Optical Transceiver and Cable Support | 184

PTX10000 Status Panel LEDs

The status panel of the PTX10008 and PTX10016 has two purposes:
Shows the overall status of the chassis
Type
Hot-insertable and hot-removable. We recommend that you take line cards offline
before removing them. For example:
user@router> request chassis fpc slot slot-number offline
Hot-insertable and hot-removable.
41