Juniper PTX10008 Hardware Manual page 356

Figure 218: Moving the PTX10008 Using a Mechanical Lift
SEE ALSO
Powering Off a PTX10000 | 356
Manually Removing a PTX10008 from a 4-Post Rack
If you cannot use a mechanical lift to remove the router (the preferred method), you can install it manually.
CAUTION:
controllers installed. Lifting the chassis and mounting it in a rack or cabinet requires at
least three people.
Make sure the chassis is empty (contains only the backplane) before you lift it.
The chassis weighs approximately 145 lb (66 kg) with only the fan tray
360