Juniper PTX10008 Hardware Manual page 208

Figure 81: Loading the PTX10008 into a Rack Using a Mechanical Lift
3. Using the lift, align the router in front of the rack, centering it in front of the base brackets.
4. Lift the chassis approximately 0.75 in. (1.9 cm) above the surface of the base brackets. Align the chassis
as close as possible to the base brackets.
5. Carefully slide the chassis onto the adjustable base and rear mounting brackets until the chassis flanges
contact the rack rails. The mounting brackets ensure that the holes in the flanges align with the holes
in the rack rails. See Figure 82 on page 212.
211