Juniper PTX10008 Hardware Manual page 35

Table 4: PTX10008 Hardware Configurations (continued)
Router Configuration
Redundant DC configuration
PTX10008-PREMIUM
NOTE: You can install up to eight line cards (any combination of line cards) in the PTX10008.
NOTE: Line cards and the cable management system are not part of the base or redundant
configurations. You must order them separately.
NOTE: If you want to purchase additional power supplies (AC, DC, HVAC, or HVDC), SIBs, or RCBs
for your router configuration, you must order them separately.
SEE ALSO
PTX10000 Routing and Control Board Description | 78
JNP10K-PWR-AC Power Supply | 61
JNP10K-PWR-DC Power Supply | 65
PTX10008 Switch Interface Board Description | 86
Configuration Components
Chassis, including power bus
Two RCBs
Two fan tray controllers (JNP10008-FAN-CTRL or JNP10008-FTC2)
Two fan trays (JNP10008-FAN and JNP10008-FAN2)
Six DC power supplies (JNP10K-PWR-DC, JNP10K-PWR-DC2, or
JNP10K-PWR-AC2)
Six SIBs
Eight line card covers
36