Juniper PTX10008 Hardware Manual page 81

This topic covers:
Routing and Control Board Status Panel LEDs
The RCB status panel LEDs indicate the state of the RCB (see
Figure 43: Routing and Control Board Status Panel LEDs
1 Power (PWR) LED
—
2 Status (STS) LED
—
Table 19 on page 82 describes the LEDs on the RCB status panel.
Table 19: Routing and Control Board (JNP10K-RE0 and JNP10K-RE1) Status LEDs
LED
PWR
STS
MST
Color State
Green On steadily
Yellow Blinking
Dark Unlit
Green On steadily
Green Blinking
Yellow On steadily
Yellow Blinking
Dark Unlit
Green On steadily
Dark Unlit
Figure 43 on page
3 Master (MST) LED
—
4 Offline button
—
Description
RCB is receiving adequate power.
RCB has detected an error.
RCB is not powered up.
RCB is online and functioning correctly.
The beacon feature is enabled.
RCB is booting.
The RCB has detected an error.
The power supply is switched off.
RCB is the master.
RCB is the backup.
82).
82