Juniper PTX10008 Hardware Manual page 100

Packet transport router

Hide thumbs Also See for PTX10008:

Table of Contents

Figure 57: PTX10K-LC1104 Interfaces

All optical properties are configured under the ot interface. Use the set interfaces ot-x/x/x

optics-options CLI command to set these options. Perform MACsec configuration on the et interface

using the set security macsec connectivity-association ca-name encryption-algorithm. Optical

transport network (OTN) related configurations also are done on the et interface.

Each of the six network ports can operate in one of three modulation formats; see

Table 31 on page

Show Quick Links

Chapters

Table of Contents