Juniper PTX10008 Hardware Manual page 199

SEE ALSO
Installing a PTX10000 Line Card | 338
Installing a PTX10000 Switch Interface Board | 326
Installing a PTX10000 Routing and Control Board | 247
Comparing the PTX10000 Order to the Pack
Use the following procedure to compare the sales order and packing list against the contents of the chassis
shipping crate.
The router chassis shipment includes a packing list. Check the parts you receive in the shipping crate
against the items on the packing list. The packing list specifies the part number and description of each
part in your order.
If any part on the packing list is missing, contact your customer service representative, or contact Juniper
Networks Customer Care from within the U.S. or Canada by telephone at 1-888-314-5822. For
international-dial or direct-dial options in countries without toll-free numbers, see
https://www.juniper.net/support/requesting-support.html.
Items that ship separately from the chassis are:
Line cards
Chassis front panel kit
NOTE: The kit is a spare part and can ship with the chassis or separately.
Cable management kit
1. Determine the configuration. The parts shipped depend on the configuration you order. Supported
configurations are:
Premium redundant configuration. See
PTX10008-PREMIUM
PTX10016-PREMIUM
Base configuration (PTX10008-BASE). See
2. Compare premium redundant configuration orders using
Table 73 on page 203.
Table 74 on page 203.
Table 73 on page 203.
202