Table of Contents
Advertisement
Figure 87: Attaching Front Panel Brackets on a PTX10016
6. Use the final two mounting screws to attach a latch bracket to the top right of the chassis frame so
there are brackets on all four corners of the front of the chassis.
7. Lift the front panel and rest it on the two bottom brackets.
8. Slide the panel back on the bracket glides until it engages on the two ramps.
9. Tilt the panel towards the chassis until it is vertical with the chassis. The blue release buttons on the
side of the panel click into place (see
for PTX10016).
Figure 88 on page 221
for PTX10008 and
Figure 89 on page 222
220
Hide quick links:
Advertisement
Chapters
Table of Contents
