Juniper PTX10008 Hardware Manual page 323

PTX10008 rear panel (see
Figure 191 on page 327).
Figure 190: ESD Point on PTX10008 Chassis Rear
1 ESD point
—
Figure 191: ESD Point on PTX10016 Chassis Rear
3. Remove the appropriate fan tray (see
4. Either remove the failing SIB (see
remove the cover by grasping each side of the plate and pulling straight out (see
for an example using the PTX10008).
Figure 190 on page 327) and below PSU_9 on the PTX10016 rear panel (see
"Removing a PTX10000 Fan Tray" on page
"Removing a PTX10000 Switch Interface Board" on page
258).
332) or
Figure 192 on page 328
327