Juniper PTX10008 Hardware Manual page 161

Figure 73: Front View of PTX10016
1 Routing and Control Boards (RCBs)
—
2 Status panel
—
3 Handles
—
WARNING:
of the chassis on the base brackets. Do not use the handles to lift the chassis, even when
the chassis is empty. See Mounting a PTX10016 in a Four-Post Rack Using a Mechanical
Lift for instructions for properly moving a loaded chassis.
SEE ALSO
The handles on each side of the chassis facilitate the fine-tune positioning
4 Mounting holes for front panel
—
5 Line cards
—
163