Juniper PTX10008 Hardware Manual page 286

Figure 154: Installing a JNP10K-PWR-AC2 in a PTX10016
11. Attach each power cable to a dedicated power (A and B). The JNP10K-PWR-AC2 only requires that
each power supply be connected to a separate source. See
cabling combinations for PTX10008 and
Figure 155: Proper Load Balancing for JNP10K-PWR-AC2 Power Cables on PTX10008
OR
Figure 155 on page 290
Figure 156 on page 291
for some possible
for PTX10016.
290