Figure 200: Extracted SIB
1
Connectors
—
RELATED DOCUMENTATION
PTX10008 Switch Interface Board Description | 86
PTX10016 Switch Interface Board Description
PTX10000 Switch Interface Board LEDs | 88
Removing and Installing PTX10000 Line Card
Components
IN THIS SECTION
Installing a PTX10000 Line Card | 338
Removing a PTX10000 Line Card | 341
Installing the PTX10000 Cable Management System | 344
PTX10000 line cards are field-replaceable units (FRUs) that can be installed in any of the line card slots
on the front of the chassis. The line cards are hot-insertable and hot-removable: you can remove and
replace them without powering off the router or disrupting router functions. To install or remove the line
cards in a PTX10008 router or a PTX10016 router, refer to the following sections:
2
PC board
—
337