Juniper PTX10008 Hardware Manual page 389

Packet transport router

Hide thumbs Also See for PTX10008:

Table of Contents

To pack and ship PTX10000 components:

1. Place individual FRUs in antistatic bags.

2. Use the original packing materials if they are available. If the original packing materials are not available,

ensure the component is adequately packed to prevent damage during transit. The packing material

you use must be able to support the weight of the component.

3. Ensure that the components are adequately protected with packing materials and packed so that the

pieces are prevented from moving around inside the carton.

4. Close the top of the cardboard shipping box and seal it with packing tape.

5. Write the RMA number on the exterior of the box to ensure proper tracking.

Chapters

Table of Contents