Juniper PTX10008 Hardware Manual page 262

You have removed the associated fan tray and fan tray controller. See
on page 258 and "Removing a PTX10000 Fan Tray Controller" on page
Ensure that you have the following parts and tools available to install a fan tray controller into a PTX10000:
Electrostatic discharge (ESD) grounding strap
Replacement fan tray controller
A Phillips (+) screwdriver, number 1 for the captive screws
To install a fan tray controller:
1. Remove the replacement fan tray controller from the electrostatic bag.
2. Carefully slide the fan tray controller into the fan tray controller slot until it is flush with the mounting
holes. See Figure 126 on page 266
Figure 126: Replacing a PTX10008 Fan Tray Controller
Figure 127: Replacing a PTX10016 Fan Tray Controller
and Figure 127 on page
"Removing a PTX10000 Fan Tray"
267.
266.
266