Juniper PTX10008 Hardware Manual page 231

5. Place the chassis grounding lug and cable over the PEM nuts with the cable connection pointing to the
left. See Figure 100 on page 234
Figure 100: Connecting a Grounding Cable to the PTX10008
Figure 101: Connecting a Grounding Cable to the PTX10016
6. Place the two screws over the grounding lug and grounding cable.
7. Tighten the two 10-32 screws using a Phillips screwdriver and apply torque between of 30.1 in.-lb (3.4
N-m) and 42.04 in.-lb (4.75 N-m).
8. Dress the grounding cable and ensure that it does not touch or block access to other device components
and that it does not drape where people can trip over it.
and Figure 101 on page 234.
234