Juniper PTX10008 Hardware Manual page 329

333
Figure 195: ESD Point on PTX10008 Chassis Rear
1 ESD point
—
Figure 196: ESD Point on PTX10016 Chassis Rear
4. Remove the appropriate fan tray (see "Removing a PTX10000 Fan Tray" on page 258).
5. Loosen the captive screws at the top and bottom of the card.
6. Grasp both ejector handles and spread them apart. The SIB slides about a quarter of the way out of
the slot. See Figure 197 on page 334.