Table of Contents
Advertisement
Figure 185: Proper Load Balancing for JNP10K-PWR-DC2 Power Cables on PTX100016
WARNING:
or drape where people can trip on them.
18. Set the three dip switches to set the inputs and whether the power supply is running at 3000 W,
5000 W, or 5500 W. See
Set both enable switches to the on position when using both source inputs. When not using source
redundancy, set the unused source to the off (O) position. The LED turns red and indicates an error if
a source input is not in use and the enable switch is on (|).
Table 80: Setting the JNP10K-PWR-DC2 Dip Switches
Switch
State
1
On
Off
2
On
Off
Ensure that the power cords do not block access to router components
Table 80 on page 319
and
Field
IP0 is present
IP0 is not present
IP1 is present
IP1 is not present
Figure 186 on page
320.
319
Hide quick links:
Advertisement
Chapters
Table of Contents
